Duro-Last Roofing, Inc. Adds Standing Seam Metal Product Line

Duro-Last Roofing®, Inc. has added a standing seam metal product line to its roofing system offerings. The new line will enable authorized Duro-Last contractors to provide a standing seam roofing installation to meet virtually any aesthetic requirements. The new standing seam program includes metal production capabilities provided by a nationwide network of independent regional manufacturers.

Depending on the installation location, roof panels will be produced at EXCEPTIONAL Metals’ Saginaw, Michigan, facility or by one of the regional manufacturers. All panels will be produced under the authority of EXCEPTIONAL® Metals, a division of Duro-Last.

Profiles, showcased below, will be available for architectural, structural, and flush wall/soffit panel standing seam applications. Paint and substrate warranties of 25 years and 35 years are available for panels, depending on the substrate metal they are made from and the finish that is applied.

EM 150SL

The 1-1/2″ Snap Lock metal roofing system is designed to be installed quickly, reducing labor costs, and offers the designer a concealed fastener and clip application that allows for expansion and contraction.

EM 150SS

The 1-1/2″ traditional mechanically seamed metal roof system enhances the architectural appearance and is engineered to exceed most wind-load requirements in the country. The seamed profile allows the designer the ability to specify various applications. The concealed fasteners and patented articulating two piece floating 150 Mitchell Clip assist in minimizing the appearance of oil canning.

EM 175S

The 1-3/4″ Snap Lock profile provides a continuous interlocking metal roof system. The system offers the designer a concealed fastener and clip application that allows for expansion and contraction. The Snap Lock metal roofing system can be installed quickly, reducing labor costs. This profile offers a simple installation and provides very high wind uplift resistance.

EM 200S

The 2″ mechanically seamed metal roof system enhances the architectural appearance and is engineered to exceed most wind load requirements in the country. The versatility of this profile’s engineering allows the designer the ability to specify both low and steep slope applications. The concealed fasteners and patented articulating two piece floating 200 Mitchell Clip assist in minimizing the appearance of oil canning.

Flush Wall/Soffit Panel

The Flush Wall/Soffit panel is designed for wall, fascia, and soffit applications where a flush or flat appearance is desired. Flush wall/soffit panels are available with optional stiffening beads and ventilation and are not intended for use in roofing or mansard applications.

Share this...Share on FacebookShare on Google+Tweet about this on TwitterEmail this to someone

Leave a Reply

Your email address will not be published. Required fields are marked *