Issued in 1999, Executive Order 13123 established a mandate for federal agencies to reduce energy consumption 30 percent by 2005 and 35 percent by 2010. It also stated that agencies must use ENERGY STAR® products when available and must use life-cycle and energy cost analyses when selecting products. In January of 2007 that Executive Order was revoked by President Bush and replaced with Executive Order 13423.
Executive Order 13423 is intended to strengthen federal environmental, energy, and transportation management. This Order not only addresses energy usage but also emphasizes use of sustainable environmental practices and improved transportation management.
The Executive Order stipulates that at least half the required renewable energy consumed must come from new renewable sources. Other key goals can be met, in part, through the use of PVC (vinyl) roofing systems:
1. Agencies must reduce energy intensity (energy consumption per square foot of building space) by 3 percent annually through 2015 or 30 percent by 2015 relative to 2003.
– Highly-reflective vinyl roofing systems can reduce a building’s cooling load and energy consumption.
2. When acquiring goods and services, agencies must utilize sustainable environmental practices, including the use of products with traits such as energy efficiency, water efficiency and recycled content.
– PVC roofing systems typically require less energy to manufacture than other types of systems. In addition, the production of vinyl roofing membrane often includes the recycling of manufacturing scrap.
3. Agencies must reduce the quantity of toxic and hazardous chemicals and materials used, and divert materials from solid waste disposal when possible.
– PVC roofing systems can be mechanically-attached, eliminating hazardous chemicals from the installation process. In addition, vinyl systems have a proven history of recyclability at the end of their roofing lives; some PVC roofing manufacturers – including Duro-Last – have established programs to recycle post-consumer roofing systems.
If your commercial building is in need of a new roof, there is still plenty of good weather to complete the process. Often, the need for a new roof is forgotten during the drier summer months, but as the end of the year approaches and cooler, wetter weather sets in, building owners and managers should consider whether their roofs will be able to outlast another winter.
Now is the perfect time to evaluate the integrity of your roofing system. In the fall, leaves, branches, and debris often collect on a roof and clog drains and vents, causing water to pond and possibly damage the roof. It’s a good idea to take a roofing expert – perhaps a local contractor you can trust (get references) – up on the roof to help you determine whether to repair or replace it.
If you decide to replace your roof, the Duro-Last roofing system is formulated so it can be installed with top-quality results during the marginal weather that affects much of the country in the last quarter of the year. A Duro-Last installation does not require a specific daytime temperature range, and is not affected by humidity variations.
If you need a contractor, we have relationships with local roofers across North America. If you are already working with a roofing contractor on a new Duro-Last installation you still have plenty of time to complete the process and get the roof installed before the arrival of harsher weather in the first quarter of the year.
Performing a little rooftop “due diligence” now could prevent the formation of a bucket brigade inside your building next spring.<-->
We’re excited about this new way to keep in touch with our customers and the commercial building and construction market as a whole.
With more than 30 years of manufacturing the “World’s Best Roof”® behind us, we feel we have some nuggets of wisdom to share. We will regularly post articles about industry issues and trends, as well as highlight some of the goings-on here at Duro-Last.
We also believe that we should always be in learning mode, and to that end we invite your comments. Thank you for your participation!
You must consider many factors when your roof needs to be replaced or you are constructing a building that requires a new roof. Price. Quality of the product being installed. Prefabrication. Installation disruptions. Ease of maintenance. Performance. Environmental impact. Life-cycle costs, and so on. All of these aspects are crucial to review in order to make the wisest roofing choice and get the best long-term value for your investment.
This is the first in a series of posts that will discuss the issues around purchasing a roofing system.
We all know that consumers want to get their money’s worth when they purchase a product. That’s why most people look for the “big sales” in the weekend edition of their local newspapers. We tend to want products that are inexpensive but still produce the best results. However, that rarely happens.
When it comes to roofing systems, you normally get what you pay for. You must consider the long-term value you will be receiving at the price you will be paying. Remember: high-quality products usually cost more.
Additionally, if you are going to invest in a high-performance roofing system, you will want to have skilled roofers installing your new roof. Regardless of the system installed, the effectiveness of the roofing system is dependent on the contractor’s professional experience, craftsmanship, and reputation. Ask to see references and other roofing jobs the contractor has completed. Check out his crew to see how professional they look and act. Do they have a standard uniform or do they show up in tattered jeans and a grubby t-shirt? Are they courteous and able to answer your questions? Whatever you do, make sure that you are completely comfortable with a contractor’s crew before you allow them to set foot on your property.
Another question that should be asked when looking into the price of a roofing system is – How complete is the system? Are all the accessories included with the roofing system? Some come complete with all accessories included, while others can “nickel and dime” you for components that were not a part of the original plan. Furthermore, some manufacturers require you to keep a regular maintenance program in order to be covered by their warranty; another added expense if you are not prepared to implement such a plan.
Proper investigation into the “hidden” costs of a new roofing system is crucial before you place your order; it can save you a lot of money down the line!
In our second installment of Factors To Consider When Purchasing A Roofing System, we will discuss what “quality” features to look for in a roofing system.
The Duro-Last roofing system has been installed on the Bardessono Inn & Spa in Yountville, California. The spa is scheduled to open in February 2009, and will be submitted to the U.S. Green Building Council for LEED Platinum certification. The spa consists of five separate buildings that are protected by almost 80,000 square feet of Duro-Last’s single-ply PVC roofing system.
The spa’s prefabricated roofing system was manufactured at Duro-Last’s Grants Pass, Oregon, facility and installed by authorized contractor Fidelity Roof Company of Oakland, California. Fidelity is also an approved installer for SunPower, the manufacturer of the PowerGuard solar electrical system that will provide electricity to the spa.
The Duro-Last roofing system is a key component of this sustainable construction project. The white membrane has reflectivity and emittance characteristics that exceed California’s Title 24 building requirements. Because it’s prefabricated, less on-site waste is produced during installation. As a company, Duro-Last recycles manufacturing scrap back into roofing membrane or other construction products. And unlike other roofing materials, the Duro-Last system is also recyclable at the end of its useful life.
The Duro-Last-plus-solar roofing assembly complements the spas many other sustainable building features. Among them: a ground source heat pump will provide both heating and cooling; every room will have occupancy sensors to control electrical usage; the spa makes extensive use of wood salvaged from native California trees; concrete and steel materials include a high percentage of recycled content; low-VOC paints and adhesives are used throughout the complex.
Steve Ruth, Duro-Last Vice President of Sales, said, “This project makes a strong environmental statement, and we’re proud to be an important part of it. The fact that the Duro-Last system has been installed on the Bardessono facility reinforces our leadership in the sustainable roofing arena.”
More commercial developers and owners of commercial buildings are installing “cool” roofs to increase the life of the roof and potentially lower operating costs.
Conventional flat roofs are black, and black materials absorb more heat, leading to warmer building. A cool roof is lighter in color and made of materials that tend to reflect light and heat. The result is a cooler building, which cuts air-conditioning costs in the summer. In fact, on a hot day, a black roof can be 70 degrees hotter than the air temperature, compared with only 20 degrees hotter for a cool roof.
In the past, some in northern climes have resisted cool roofs because they were thought to increase heating costs in the winter. Now a recent study of cool and conventional roofs by the Lawrence Berkeley National Laboratory has found that in virtually the entire country, the summer air-conditioning savings of cool roofs are greater than the increased heating cost in the winter.
There are other benefits of cool roofs that make them attractive, particularly for commercial structures:
Cool roofs tend to last longer because they suffer less thermal stress than conventional roofs do.
Cool roofs reduce the urban heat island, because the building structure is cooler. The heat island effect in one of the causes of the formation of smog and greenhouse gases.
A cool roof helps a building qualify as environmentally friendly by the U.S. Green Building Council, which is of interest to a growing number of tenants.
Cool roofs typically cost the same or only slightly more than conventional roofs to install.
Gray, Thomas O. AIA, DRS Architects. “Cool Roofs are Hot.” Post-Gazette Now
Becky Gloss joined JRB Personnel, LLC in 2000 working for Plastatech Engineering,LTD. as a Calendar Line Operator. In 2003 she was promoted to Switchboard operator at the Duro-Last corporate headquarters in Saginaw, Michigan. It didn’t take Becky long to continue her move up the ladder of success and become a Customer Serivce Representative in 2004. Through her dedication and hard work, she was then promoted to Southeast Regional Sales Coordinator before taking her current position as Midwest Regional Sales Coordinator.
Becky’s experience in the Duro-Last Sales Department has helped her provide contractors with the roofing knowledge they expect from our company. She is very detail-oriented and takes pride in helping others, whether contractors, sales reps or coworkers.
Becky really enjoys going on the road and building working relationships with the contractors and sales reps in her territory.
“There’s nothing better than walking into a contractors office and feel like you are visiting an old friend”, noted Becky.
So what does Becky like the most about Duro-Last?
“I like working for a company that sets high standards, manufactures exceptional products, and provides superior customer service that are second to none,” she said. “Duro-Last also believes in keeping its staff trained and up-to-date on new products, services, and industry news, which enables them to help contractors and sales reps.”